Assembly and Installation

**Unit to be installed in accordance with any applicable State or Local regulations and Laws pertaining to the assembly and operation of a firewood kiln, including applicable inspections and permitting.**

*Final will include drawings

1. Assemble and install in the same location; outdoors on a smooth level surface that is either concrete or steel.   
2. 6 structural panels and 2 door panels included
3. Remove left rear panel and left side panel and bolt them together.
4. Repeat for right rear and right side panels.
5. Bolt the right and left assemblies together at the rear.
6. Bolt the top panels to the right and left assemblies and to each other.
7. Bolt the right and left hinges to the right and left doors.
8. Bolt the doors to their corresponding sides of the kiln.

*Delivery will include draft documents of all parts and installation details.

1. Unit is to be installed outdoors on a smooth level surface that is either concrete or steel.  
2. Space provided needs to be enough for the unit itself, corresponding hardware, and loading by pallet jack.
3. If installed on concrete, bolt to the ground with concrete anchors.
4. If installed on steel, bolt as well.
5. Install exterior sheathing and door handles.
6. Install ductwork and fans.
7. Install torpedo heater.